Flat Face Pulley
| Example | Style | Material | Finish Code | OD Code | Length Whole Inches | Length 32’s of Inch | Bore Whole Inches | Bore 32’s of Inch | Bore Feature |
| PUL02 | _ _ | _ | _ _ _ | _ _ | _ _ | _ | _ _ | _ | |
| Example | PUL02 | PV | S | 316 | 10 | 00 | 1 | 00 | B |
Example Above: Flat face pulley, PVC material, machined smooth face, 3-1/2″ OD, 10.00″ long, 1.00″ bore with Set Screws.
Material Codes
| Material | Description | Material | Description |
| PV | Code for PVC | UH | Code for UHMW |
| 4S | Code for Stainless Steel | ** | Other materials available on request |
Finish Codes
| Code | Description | Code | Description |
| K | Code for Knurled Face | S | Code for Machined Smooth Face |
OD Codes (outside diameter)
| 129 = code for 1.90″OD | 228 = code for 2-7/8″OD | 400 = code for 4″OD | 616 = code for 6-1/2″OD |
| 212 = code for 2-3/8″OD | 316 = code for 3-1/2″OD | 416 – code for 4-1/2″OD | 818 = code for 8-1/2″OD |
Bore and Length Codes
| 08 = code for 1/4″ | 14 = code for 7/16″ | 20 = code for 5/8″ | 26 = code for 13/16″ |
| 10 = code for 5/16″ | 16 = code for 1/2″ | 22 = code for 11/16″ | 28 = code for 7/8″ |
| 12 = code for 3/8″ | 18 = code for 9/16″ | 24 = code for 3/4″ | 30 = code for 15/16″ |
First two digits of length code is whole inches.
Second two digits of length code is based on 32’s of an inch increments.
( Example: Length is 15-1/2” = 1516 )
Bore Features
| A = Keyway & Set Screws | B = Set Screws | C = UHMW Journal Bearings | D = Machined for Press Fit of ball bearing | E = Special – Need Detail of special |