Powered Zero Pressure-old- Accumulation Conveyor

Zero Pressure Accumulation Conveyor:
Zero pressure accumulation conveyors keep the conveyed product in its zone with the use of sensors until it receives signal to release it, then balance of the products will move forward to the next zone while staying in their designated space.  This type of conveyor is often used for picking lines, shipping and receiving lines, manufacturing and assembly lines and for storage and retrieval systems.  Also used for feeding another piece of equipment, case sealer, strapping machine, stretch rapper, transfer conveyor or reciprocating conveyor.  Efficient to operate – less drives required.

Zero Pressure Accumulation Conveyor Information & Quote Form:


Belt Driven Zero Pressure Conveyor:

Rollers are driven by a belt powered by the pressure from tread rollers.  The zones are controlled by sensors or photo-eyes with the use of pneumatic clutches.

Medium Duty Belt Driven Zero Pressure Conveyor:
Standard between frame widths: 15″, 19″, 21″, 25″, 27″, 33″, & 39″  (Other widths available on request)
Frame: 7” x 1-1/2″ x 12ga. Formed Channel frames.
Rollers: 1.9″OD rollers mounted 3″, 4″ or 6″ centers
Accumulation Zones: 18″, 24″, 30″, 36″ & 40″

Heavy Duty Belt Driven Zero Pressure Conveyor:
Standard between frame widths: 39″, 43″, 51 & 57″ (Other widths available on request)
Frame: 5-1/2” x 1-1/2″ x 3/16″ Formed Channel frames that are slotted for tread rollers to pop-out.
Rollers: 2-1/2″OD rollers mounted 3″, 4″ or 6″ centers
Accumulation Zones: 60″


Chain Driven Zero Pressure Conveyor:

Chain Driven Zero Pressure Conveyor:
Rollers are driven “roll to roll” within zones. The zones are controlled by sensors or photo-eyes with the use of pneumatic clutches.

Medium Duty Chain Driven Zero Pressure Roller Conveyors:
Standard conveying surface widths: 12″, 18″, 24″, 30″, 36″, 42″ & 48″
Frame: 6-1/2” x 1-1/2″ x 10ga. and 4-1/2” x 1-1/2″ x 10ga Formed Channel frames.
Rollers: 1.9″OD rollers mounted on 4″or 6″ centers
Accumulation Zones: 3’0″ to 5’0″

Heavy Duty Chain Driven Zero Pressure Roller Conveyors:
Standard conveying surface widths: 12″, 18″, 24″, 30″, 36″, 42″ & 48″
Frame: 7” x 1-1/2″ x 7ga. and 5” x 1-1/2″ x 7ga Formed Channel frames.
Rollers: 2.5″OD rollers mounted on 4″or 6″ centers
Accumulation Zones: 3’0″ to 5’0″


Powered Roller Zero Pressure Conveyor:


Fast and easy installation and setup. Low Maintenance and fewer spare parts. 24 volt DC Motorized rollers are used to drive the conveyors eliminating the need for drive belts, chains or line shafts.  Very quiet conveyor. The zones are controlled by photo-eyes.

Standard between frame widths: 15″, 19″, 21″, 25″, 27″, 33″, & 39″  (Other widths available on request)
Frame: 5” x 1-3/4″ x 12ga. (rollers set high) or 7” x 1-3/4″ x 12ga. (rollers set low)  Formed Channel frames.
Rollers: 1.9″OD rollers mounted 3″centers
Accumulation Zones: 18″, 24″, 30″ (dependent on conveyor length)
Speeds Ranges: 15-34FPM up to 190-260FPM
Straight and 30, 45, 60 and 90 degree Curved sections available.

We also custom manufacture conveyors per your specifications or drawings.

Powered Conveyors

Let BNB Industries, Inc. work with you to design a conveyor or conveying system best suited for your specific applications.